Chimney & Flashing Repair in Apache Junction, Arizona
Chimney flashing and roof flashing repair — step flashing, counter flashing, and sealant that stops leaks. Free estimates, licensed local crews, written warranty.
Licensed & Insured
Credentialed local crews
Workmanship Warranty
In writing, every job
Free Estimates
No pressure, no surprises
Hassle-Free Claims
We work with your adjuster
Chimney & Flashing Repair in Apache Junction, Arizona
The chimney is the most common roof leak in the desert. The flashing seals the gap between the chimney and the roof, and the monsoon rain finds every gap. Chimney and flashing repair in Apache Junction fixes the leaks and protects the chimney.
Signs Your Apache Junction Chimney Flashing Needs Repair
- The water stains on the ceiling near the chimney — the flashing is leaking and the water is running down the chimney
- The mortar is crumbling on the chimney — the water is getting behind the flashing and the thermal cycling is damaging the mortar
- The rust or the corrosion on the flashing — the weather is corroding the metal
- The sealant is cracked or missing — the tar or the caulk at the flashing joint is failing
- The chimney is leaning or the brick is spalling — the water damage is structural
Why Apache Junction Chimneys Need Flashing Repairs
The chimney is the roof penetration that takes the most weather. The desert heat bakes the flashing and the sealant, and the monsoon rain tests the joints. The expansion and the contraction cycle the metal and the sealant cracks.
The step flashing is the key. Each piece of flashing steps up the side of the chimney and the counter flashing covers the top edge. If the step flashing is corroded or the counter flashing is loose, the water runs behind the flashing and into the house.
How We Repair Chimney Flashing in Apache Junction
- Inspect the chimney — check the step flashing, the counter flashing, the mortar, and the cricket
- Remove the old sealant — clean the old tar and caulk from the flashing joints
- Replace the damaged flashing — remove and replace the corroded step flashing or counter flashing
- Install the new flashing — bend and fit the new flashing, caulk the joints
- Test the repair — run water down the chimney and check for leaks
Chimney Flashing Repair Costs in Apache Junction
| Service | Typical range | What’s included | Warranty |
|---|---|---|---|
| Flashing reseal | $450 – $900 | Clean and reseal the flashing joints | 2 years |
| Step flashing replacement | $900 – $1,700 | Replace the step flashing, caulk | 5 years |
| Counter flashing replacement | $600 – $1,300 | Replace the counter flashing, regrout | 5 years |
| Full chimney flashing system | $1,300 – $2,800 | Replace all flashing, cricket, caulk | 10 years |
Preventing Roof Problems in Apache Junction
- Check the chimney flashing each fall — the monsoon rain reveals the leaks
- Check the mortar each year — the crumbling mortar means the water is getting in
- Check the flashing for the corrosion — the weather corrodes the metal
- Check the cricket — the cricket diverts the water around the chimney
Expert tip: in Apache Junction, the chimney flashing is the most common roof leak. The step flashing needs to be woven into the shingles, not just caulked on the surface. The caulk fails and the water runs behind the flashing.
Serving Apache Junction and Nearby Areas
We repair chimney flashing across Pinal and Maricopa County — Apache Junction, Gold Canyon, Queen Creek, Mesa, Gilbert, and the surrounding communities.
FAQ
Content above. FAQs are in frontmatter.
Start with a free chimney flashing inspection and estimate. Call us today for local crews.
More Services
All Roofing Services in Apache Junction
Every roofing service we run in Apache Junction, Pinal County — pick the one your roof needs.
Roofing Materials
Damage & Restoration
Maintenance & Prevention
Gutters & Exterior
Service Area
Apache Junction Service Area
Licensed chimney & flashing repair contractors serving Apache Junction and Pinal County and the surrounding area.
Serving Apache Junction and Pinal — Call for a free estimate
Chimney & Flashing Repair Across Arizona
Chimney & Flashing Repair in Other Arizona Cities
We run chimney & flashing repair in 19 other Arizona cities — see local pricing, process, and FAQs for your area.
FAQ
Frequently Asked Questions
How much does chimney flashing repair cost in Apache Junction?
Most chimney flashing repairs in Apache Junction run between $450 and $1,700 depending on the chimney size.
What causes chimney flashing leaks in Apache Junction?
The heat and the monsoon rain cycle the flashing. The metal expands and contracts, and the sealant cracks.
How long does chimney flashing last?
Properly installed flashing lasts 15 to 25 years before it needs replacement.
Do you replace the step flashing?
Yes. We replace the step flashing and the counter flashing if the metal is corroded.
Can you seal a chimney leak without replacing the flashing?
Sometimes. If the flashing is intact and the sealant is cracked, we can reseal it.
Free Estimates
Get a Free Roof Estimate
Talk to a local roofing expert today. Fast, honest estimates with no pressure.