Siding & Fascia Repair
Siding, fascia, and trim repair that keeps water out and your home's exterior looking sharp.
Licensed & Insured
Credentialed local crews
Workmanship Warranty
In writing, every job
Free Estimates
No pressure, no surprises
Hassle-Free Claims
We work with your adjuster
The Exterior Skin That Protects Your Walls
Siding and fascia are the exterior surfaces that shield your home from wind, rain, and sun. Fascia is the board that runs along the roof edge, behind the gutters — it is the most water-exposed part of your exterior because it sits directly behind the gutter line where water overflows and splashes. Siding covers the wall surfaces, shedding water and blocking wind. When either fails, water gets behind the wall system and causes structural damage, mold, and insulation failure.
We repair and replace siding and fascia on homes and light commercial buildings. Our crews work with vinyl, fiber cement (Hardie), wood, aluminum, and engineered wood siding, as well as wood, composite, and PVC fascia boards.
Common Siding and Fascia Problems
- Fascia rot — the most common problem; water from overflowing gutters or failed drip edge soaks the fascia board and causes wood rot
- Siding cracks — impact damage, settling, or thermal expansion that cracks vinyl, fiber cement, or wood siding
- Loose or pulled siding — wind, failed fasteners, or improper installation that lets siding panels separate from the wall
- Water damage behind siding — moisture trapped behind the siding causes rot in the sheathing and framing
- Paint failure — peeling, bubbling, or fading paint on wood or fiber cement siding
- Insect damage — termites, carpenter ants, or woodpeckers that damage wood siding and fascia
How We Repair Siding and Fascia
- Damage assessment — we identify every area that needs repair, including hidden damage behind the siding
- Fascia removal — damaged fascia is removed; the rafter tails and drip edge behind it are inspected for rot
- Rafter tail repair — any rotted rafter tails are sistered or replaced before new fascia is installed
- Drip edge verification — we confirm the drip edge is properly positioned to direct water into the gutter, not behind the fascia
- Fascia installation — new fascia board (PVC, composite, or treated wood) installed with proper flashing behind it
- Siding repair — damaged panels or boards are removed and replaced with matching material; we keep a stock of common colors and profiles
- Sealant and caulking — all joints, corners, and penetrations are sealed with high-quality exterior sealant
- Touch-up and finish — we match paint, stain, or finish to blend the repair with the existing siding
Siding and Fascia Repair Costs
| Repair type | Typical range |
|---|---|
| Fascia board replacement (per section) | $150 – $350 |
| Rafter tail repair (per tail) | $100 – $250 |
| Vinyl siding panel replacement | $100 – $300 per panel |
| Fiber cement siding replacement | $200 – $500 per section |
| Wood siding repair | $150 – $400 per section |
| Complete fascia replacement (per side) | $500 – $1,500 |
| Water damage remediation | Varies by extent |
Fascia replacement is one of the most common repairs we perform. The combination of water exposure behind the gutter and UV exposure on the face makes fascia the fastest-deteriorating exterior board on most homes.
Siding Material Comparison
Choosing the right siding material for repair or replacement affects cost, maintenance, and longevity. Here is how the major options compare.
| Factor | Vinyl | Fiber cement (Hardie) | Wood | Engineered wood |
|---|---|---|---|---|
| Cost per sq ft installed | $3 – $7 | $6 – $12 | $8 – $15 | $4 – $8 |
| Lifespan | 20 – 40 years | 30 – 50 years | 20 – 40 years | 20 – 30 years |
| Maintenance | Low — wash annually | Low — repaint every 10 – 15 years | High — repaint every 5 – 7 years | Moderate — repaint every 7 – 10 years |
| Impact resistance | Moderate — cracks in cold | High — resists dents | High — dents but does not crack | Moderate |
| Fire resistance | Self-extinguishing | Non-combustible | Combustible | Varies by product |
| Moisture resistance | Excellent | Excellent | Poor without paint | Good with finish |
| Appearance | Standard profiles | Sharp, wood-like texture | Natural grain | Simulated wood grain |
Vinyl is the most economical choice for budget-conscious repairs. Fiber cement is the best long-term value — it resists fire, moisture, and insects while holding paint longer than wood. Engineered wood offers a middle ground between cost and durability.
Repairing vs. Replacing Siding
Repair makes sense when:
- Damage is limited to a few panels or sections
- The siding material is still in good condition overall
- The color is still available for matching
- The underlying wall structure is sound
Replace makes sense when:
- Damage is widespread or recurring
- The siding material is discontinued or impossible to match
- Water damage behind the siding has compromised the sheathing
- The siding is over 30 years old and brittle
Fascia Board Materials: What to Choose
Fascia replacement is an opportunity to upgrade from wood to a maintenance-free material. Here is how the options compare.
| Material | Cost per linear foot | Maintenance | Lifespan | Appearance |
|---|---|---|---|---|
| Pressure-treated wood | $2 – $4 | Paint every 5 – 7 years | 15 – 25 years | Traditional |
| Cedar | $4 – $7 | Stain or paint every 3 – 5 years | 15 – 30 years | Premium natural grain |
| Composite (Trex, etc.) | $3 – $6 | Virtually none | 25 – 50 years | Wood-like, consistent |
| PVC (Azek, etc.) | $4 – $7 | None — factory-finished | 50+ years | Clean, painted look |
PVC and composite fascia cost more upfront but eliminate the cycle of painting and rot repair that makes wood fascia expensive over time. For most homes, PVC is the best long-term investment — it will outlast the gutters mounted to it.
Preventing Siding and Fascia Problems
- Keep gutters clean and flowing freely — overflowing gutters are the number one cause of fascia rot
- Ensure drip edge extends into the gutter so water does not run behind the fascia
- Maintain paint or stain on wood and fiber cement siding
- Trim vegetation away from the siding to prevent moisture and insect damage
- Inspect the exterior annually for cracks, loose panels, and soft spots in the fascia
- Address water stains or peeling paint immediately — they indicate moisture behind the surface
When Water Damage Goes Deeper
What starts as fascia rot or a cracked siding panel sometimes leads to hidden damage inside the wall cavity. When water gets behind the siding, it wets the plywood or OSB sheathing, saturates insulation, and promotes mold growth — all invisible from the outside.
Warning signs of deeper water damage include:
- Musty smell near exterior walls
- Paint bubbling or peeling on interior walls adjacent to exterior siding
- Soft or spongy feel when pressing on exterior walls
- Visible mold on attic sheathing near the roof edge
- Stained or discolored insulation in the attic near eaves
If we discover water damage behind the siding during a repair, we address the source before replacing the siding surface. Covering up the symptom without fixing the cause leads to recurring damage and escalating costs.
Siding damaged or fascia rotting? Call us or request a free inspection — we will assess the extent of the damage and repair it before it affects the structure.
FAQ
Frequently Asked Questions
How do I know if my fascia boards are rotting?
Look for paint peeling along the gutter line, soft spots when you press on the board, visible mold or dark staining, and gutters pulling away from the house. A screwdriver test — pressing the tip into the wood — reveals rot that is not visible on the surface.
Can I repair fascia without replacing the gutters?
In most cases, yes. We remove the gutter section, replace the fascia board, reinstall the gutter, and seal everything. The gutter does not need to be replaced unless it is also damaged or undersized.
What is the best material for fascia boards?
PVC and composite fascia are the best options for most homes. They do not rot, do not need paint, and last the lifetime of the house. Wood fascia looks traditional but requires regular painting and is vulnerable to water damage.
How much does it cost to replace siding on one side of a house?
Full siding replacement on one side of a typical home ranges from $2,000 to $6,000 depending on material, wall area, and whether there is water damage behind the existing siding.
Why does fascia rot behind the gutter?
Fascia sits directly behind the gutter where overflowing water, wind-driven rain, and splash-back constantly wet the board. Without proper drip edge and gutter pitch, the fascia stays damp and develops rot, even with painted or treated wood.
By State
Siding & Fascia Repair by State
Free Estimates
Get a Free Roof Estimate
Talk to a local roofing expert today. Fast, honest estimates with no pressure.