Gutter Repair

Small Gutter Problems Become Big Foundation Problems

A leaking gutter joint, a sagging section, or a disconnected downspout may look like a minor issue. It is not. When water overflows or leaks at a gutter failure point, it drops directly onto the fascia board, soaks the foundation soil, and pools against the basement wall. Over time, this causes fascia rot, basement flooding, foundation cracks, and landscape erosion. Fixing a $150 gutter problem now prevents thousands in foundation and water damage later.

We repair all types of gutter systems — seamless aluminum, sectional aluminum, copper, steel, and vinyl. Our crews identify the failure point, fix the specific problem, and verify the system drains properly before we leave.

Common Gutter Problems

• Leaking joints — end caps, corners, and seam connections that have separated or lost their sealant
• Sagging sections — hangers that have pulled out of the fascia or spaced too far apart
• Clogged downspouts — debris buildup that blocks water flow and causes gutters to overflow
• Detached gutters — sections pulled away from the fascia by wind, ice, or accumulated debris weight
• Improper pitch — gutters that slope the wrong way or have no slope at all, causing standing water
• Fascia rot — the wood board behind the gutter that has decayed from chronic water exposure
• Damaged downspouts — crushed, disconnected, or missing downspout sections
• Ice dam damage — gutters bent or pulled off by ice buildup during winter

How We Repair Gutters

1. Inspection — we walk the entire gutter system, running water through each section to identify leaks, sags, and flow problems
2. Hanger repair — we re-secure loose hangers and add additional hangers where sections are spaced too far apart
3. Joint sealing — we clean the joint, apply gutter sealant, and clamp or rivet the connection for a permanent seal
4. Section replacement — if a section is dented, corroded, or too damaged to repair, we cut it out and replace it with a matching seamless section
5. Downspout repair — we reconnect, replace, or reroute downspouts to ensure water flows freely to the discharge point
6. Pitch adjustment — we re-hang sagging sections with the correct slope toward the downspout
7. Fascia repair — if the fascia board is rotted, we replace it before re-attaching the gutter

Gutter Repair Costs

Repair type	Typical range
Re-seal a leaking joint	$75 – $200
Re-secure sagging section	$100 – $300
Replace a downspout	$100 – $250
Replace a gutter section	$150 – $400
Fix gutter pitch	$200 – $500
Fascia board replacement (per section)	$150 – $350
Full gutter system repair	$300 – $1,000

Most gutter repairs are completed in a single visit. We carry common gutter colors and sizes on our trucks to match your existing system.

When to Repair vs. Replace

Repair makes sense when:

• The gutter material is in good condition overall
• Damage is limited to one or two sections or joints
• The system is less than 15 years old
• Hangers and fasteners are the only problem
• The fascia board behind the gutter is solid

Replace makes sense when:

• Multiple sections are corroded, dented, or leaking
• The gutter material is thin and failing in multiple spots
• The system is over 20 years old and repairs keep adding up
• You want to upgrade to a larger size or different material
• The fascia boards need replacement along multiple sections
• You want to add gutter guards to a system that was never designed for them

We will give you an honest assessment. If a $200 repair will hold for years, we will say so. If replacement is the smarter investment, we will explain why.

Gutter Materials Compared

Material	Lifespan	Cost per linear foot	Maintenance	Best for
Vinyl	10 – 20 years	$3 – $7 installed	Low — but brittle in cold	Budget projects
Aluminum	20 – 30 years	$6 – $12 installed	Low — paint if scratched	Most homes
Steel	20 – 30 years	$9 – $15 installed	Medium — rust in coastal areas	Heavy snow regions
Copper	50 – 80 years	$25 – $40 installed	Very low — natural patina	Premium, historic homes

Aluminum is the most common gutter material in the United States. It is lightweight, rust-proof, available in dozens of factory colors, and affordable. Steel is stronger and better for heavy snow loads. Copper lasts the longest but costs three to four times more than aluminum.

Preventing Gutter Problems

• Clean gutters and downspouts at least twice a year
• Install gutter guards to reduce debris accumulation
• Ensure downspouts discharge at least 3 feet from the foundation
• Trim trees that overhang the roof and drop leaves into the gutters
• Inspect gutter pitch and hangers annually
• Schedule a professional gutter inspection every two years
• Add downspout extensions if water is pooling near the foundation
• Re-seal joints that show early signs of leakage before they fail completely

How We Repair Gutters

1. Inspection — we walk the entire gutter run, checking pitch with a level, testing every downspout, and noting every leak point
2. Realignment — sagging sections are re-hung with new hangers at proper pitch (1/4 inch drop per 10 feet toward downspouts)
3. Leak sealing — joints, seams, and end caps are cleaned, primed, and sealed with gutter sealant; badly corroded sections are replaced
4. Downspout repair — clogged or damaged downspouts are cleared or replaced; extensions added where water pools near the foundation
5. Hanger replacement — failing spikes or hangers are replaced with hidden hangers that are stronger and more visually clean
6. End cap and mitre repair — leaking corners are re-sealed or replaced with new factory mitres

Gutter repair is usually completed in a few hours. Full gutter replacement — removing old gutters and installing new ones — takes one to two days depending on the length and complexity of the gutter system.

When to Repair vs. Replace Gutters

Condition	Repair	Replace
Localized leak at a joint	Seal the joint	—
Sagging along one section	Re-hang with new hangers	—
Multiple leaks along the run	—	Replace the run
Corroded steel gutters with pinholes	—	Replace with aluminum or copper
Gutters are 20+ years old with general wear	—	Full replacement is more cost-effective
Ice-damaged gutters	—	Replace and add heat cables

Gutter Materials Compared

Material	Lifespan	Cost per linear foot installed	Maintenance	Best for
Aluminum	20 – 30 years	$6 – $12	Low	Most homes, best value
Steel	15 – 25 years	$8 – $15	Medium — can rust	Heavy snow areas
Copper	50 – 80 years	$25 – $40	Very low — natural patina	Premium, historic homes

Aluminum is the most common gutter material in the United States. It is lightweight, rust-proof, available in dozens of factory colors, and affordable. Steel is stronger and better for heavy snow loads. Copper lasts the longest but costs three to four times more than aluminum.

Gutters leaking or sagging? Call us or request a free inspection — we will identify the problem and fix it before it causes foundation damage.