Rubber (EPDM) Roofing in Hot Springs, Arkansas

EPDM is the black rubber membrane that has protected flat roofs for decades. It stretches with the temperature swings, resists the lake humidity, and shrugs off the spring storms. Rubber roofing in Hot Springs means a tough, flexible roof for the Ouachita climate.

Signs Your Hot Springs Flat Roof Needs EPDM

• The old membrane is cracking — age and the sun have dried it out
• The seams are splitting — the adhesive bond is failing
• Water stains on the ceiling below — the membrane has a leak
• Blisters under the surface — moisture is trapped beneath
• Repeated repairs, no lasting fix — the old system is beyond patching

Why EPDM Works in Garland County

The temperature swings are the main reason. Hot Springs summers push 90s and the winters dip below freezing, and EPDM flexes with both. Stiffer membranes crack under that constant movement; rubber stretches instead.

The lake humidity is the second reason. The moist air off Lake Hamilton attacks glued seams, but EPDM’s factory-made splices hold. The rubber membrane stays watertight where older systems fail.

How We Install EPDM Roofs in Hot Springs

1. Inspect the deck — confirm it is dry, clean, and level
2. Prepare the surface — sweep, dry, and prime the base
3. Lay the membrane — roll out the EPDM over the deck
4. Splice and adhere — bond the seams and fasten the edges
5. Flash the penetrations — the drains, pipes, and parapets sealed

EPDM Roofing Costs in Hot Springs

Service	Typical range	What’s included	Warranty
EPDM roof, 1,000 sq ft	$6,000 – $8,500	Membrane, adhesive, seams	20–30 yr
EPDM roof, 1,500 sq ft	$8,000 – $11,000	Membrane, adhesive, seams	20–30 yr
EPDM roof, 2,000 sq ft	$10,000 – $13,000	Membrane, adhesive, seams	20–30 yr
EPDM repair	$400 – $1,600	Patch, seam, or flash repair	2 years

Getting the Most From a Rubber Roof in Hot Springs

• Keep the drains clear — the tree canopy fills the scuppers with leaves
• Trim overhanging branches — a limb can puncture the membrane
• Watch the seams — a split seam is the first place a leak starts
• Wash off the algae — the lake humidity feeds growth on the surface

EPDM tip: in Hot Springs, the splices are the weak point on any rubber roof. Factory-made seam kits and clean adhesion keep the membrane watertight through the corridor storms.

Serving Hot Springs and Nearby Areas

We install and repair EPDM roofs across Garland County — Hot Springs, Hot Springs Village, Lake Hamilton, and the surrounding communities.

FAQ

Content above. FAQs are in frontmatter.

Start with a free rubber roof inspection and honest estimate. Call us today for local crews and a written warranty.