Rubber (EPDM) Roofing in Folsom, California
EPDM synthetic rubber roofing — flexible, weather-tight, and proven for decades on low-slope roofs. Free estimates, licensed local crews, written warranty.
Licensed & Insured
Credentialed local crews
Workmanship Warranty
In writing, every job
Free Estimates
No pressure, no surprises
Hassle-Free Claims
We work with your adjuster
Rubber (EPDM) Roofing in Folsom, California
The flat roofs on the Folsom homes and the small businesses need the membrane that handles the heat, the sun, and the rain. EPDM is the synthetic rubber that does the job. Rubber roofing in Folsom means the tough membrane that lasts.
Why EPDM Roofs Work in Folsom
- Durability — the rubber resists punctures and the weather
- Flexibility — the membrane moves with the temperature swings
- Heat and rain protection — the rubber handles the Valley extremes
- Long lifespan — 20 to 25 years with the maintenance
- Easy repair — the punctures and the seams patch cleanly
Why Folsom Buildings Choose EPDM
The heat is the reason. The Valley summer pushes past 90 degrees, and the temperature swings between the hot days and the cool nights test the roofing materials. The EPDM stays flexible through the swings without cracking.
The low maintenance is the second reason. EPDM does not need the frequent attention that the older built-up roofs require.
How We Install EPDM Roofs in Folsom
- Inspect the deck — confirm the surface can carry the membrane
- Prep the surface — clean and repair the existing roof
- Lay the EPDM — the rubber membrane, rolled across the roof
- Seam the sheets — the adhesive and the seam tape fuse the joints
- Seal the details — the drains, the curbs, and the penetrations
EPDM Roofing Costs in Folsom
| Service | Typical range | What’s included | Warranty |
|---|---|---|---|
| EPDM repair | $400 – $1,800 | Patch the punctures and the seams | 3 years |
| EPDM installation | $9,000 – $20,000 | New membrane, full install | 20 years |
| EPDM re-cover | $6 – $10 per sq ft | New EPDM over the existing roof | 20 years |
| White coating | $2 – $4 per sq ft | Cool the roof, extend the life | 7 years |
Expert tip: in Folsom, the white-coated EPDM gives you the best of both. The rubber stays tough, and the white coating reflects the Valley sun and keeps the building cool.
Serving Folsom and Nearby Areas
We install EPDM roofs across Sacramento County — Folsom, Rancho Cordova, El Dorado Hills, Roseville, and the surrounding Valley communities.
FAQ
Content above. FAQs are in frontmatter.
Start with a free EPDM roof estimate. Call us today for local crews.
More Services
All Roofing Services in Folsom
Every roofing service we run in Folsom, Sacramento County — pick the one your roof needs.
Roofing Materials
Damage & Restoration
Maintenance & Prevention
Gutters & Exterior
Service Area
Folsom Service Area
Licensed rubber (epdm) roofing contractors serving Folsom and Sacramento County and the surrounding area.
Serving Folsom and Sacramento — Call for a free estimate
Rubber (EPDM) Roofing Across California
Rubber (EPDM) Roofing in Other California Cities
We run rubber (epdm) roofing in 147 other California cities — see local pricing, process, and FAQs for your area.
FAQ
Frequently Asked Questions
What is EPDM roofing?
EPDM is a synthetic rubber membrane. It is durable, flexible, and handles the weather well. It is a common choice for flat roofs.
Why choose EPDM for a Folsom roof?
EPDM handles the Valley heat and the temperature swings without cracking. It is tough and lasts 20 to 25 years.
Is EPDM good in the sun?
Yes. The black EPDM handles the UV well, and the white-coated EPDM reflects the heat for the cooling savings.
How much does a rubber roof cost?
EPDM runs between $9,000 and $20,000 for a typical flat roof.
Can EPDM be repaired?
Yes. EPDM patches cleanly. A puncture or a seam split is a straightforward repair.
Free Estimates
Get a Free Roof Estimate
Talk to a local roofing expert today. Fast, honest estimates with no pressure.