TPO Roofing in Twin Falls, Idaho

TPO Roofing in Twin Falls means roofing built for the Idaho climate - the heat, the humidity, and the storms. The Idaho heat and the humidity feed the algae and the moss on the shaded slopes, and the sagebrush and pine debris coats the surface.

Signs Your Twin Falls Roof Needs TPO Roofing

• Ponding water after a storm - the drainage is not working
• Seam separation - the heat-welded joint has failed
• Punctures or tears - the debris has damaged the membrane
• Cracked or brittle areas - the UV has aged the material
• Leaks at the flashings - the thermal cycling has loosened the seals

Why Twin Falls Roofs Need TPO Roofing

The heat reflection is the main advantage. The white TPO membrane reflects the sun and the surface temperature stays lower. The building stays cooler.

The seam strength is the second advantage. The TPO seams are heat-welded, which creates the bond as strong as the membrane itself.

How We Do TPO Roofing in Twin Falls

1. Inspect the roof deck - check the structure, the insulation, and the slope
2. Install the insulation - the polyiso insulation for the thermal barrier
3. Lay the TPO membrane - the white membrane over the insulation
4. Weld the seams - the hot-air welder fuses the seams together
5. Flash the penetrations - the drains, the vents, and the HVAC curbs

TPO Roofing Costs in Twin Falls

Service	Typical range	What’s included	Warranty
TPO roof replacement	$5.00 - $8.00/sq ft	Tear-off, insulation, new TPO	15 years
TPO roof repair	$500 - $2,500	Patch punctures, re-weld seams	2 years
TPO flashing repair	$400 - $1,200	Re-seal the penetrations	2 years
TPO coating restoration	$1.50 - $3.00/sq ft	Clean, prime, and coat the membrane	5 years

Preventing Problems in Twin Falls

• Inspect the membrane after every storm - the debris causes the punctures
• Check the seams each spring - the thermal cycling stresses the welds
• Clear the drains and the scuppers - the debris blocks the water flow
• Keep the HVAC units off the membrane - the foot traffic wears the surface

The TPO roof in Twin Falls is the smart choice for the flat roof. The white membrane reflects the heat and the building stays cooler. The heat-welded seams and the proper maintenance keep the roof watertight for 20 years.

Serving Twin Falls and Nearby Areas

We serve Twin Falls and the surrounding Twin Falls County communities - Jerome, Burley, Kimberly, Filer - and the wider South Central Idaho region.

FAQ

Content above. FAQs are in frontmatter.

Start with a free roof inspection and honest estimate. Call us today for local crews.