TPO Roofing in Burlingame, California
Thermoplastic polyolefin (TPO) single-ply roofing — energy-reflective, durable, and ideal for commercial roofs. Free estimates, licensed local crews, written warranty.
Licensed & Insured
Credentialed local crews
Workmanship Warranty
In writing, every job
Free Estimates
No pressure, no surprises
Hassle-Free Claims
We work with your adjuster
TPO Roofing in Burlingame, California
The white TPO membrane is the standard for the flat commercial roofs in Burlingame, including the offices and the biotech buildings. It reflects the heat, sheds the marine moisture, and holds its seams in the bay wind. TPO roofing in Burlingame means the roof built for the Peninsula climate.
Why TPO Roofing Works in Burlingame
- Reflects the heat — the white membrane keeps the building cooler
- Heat-welded seams — the seams are welded, not glued, and they resist the moisture
- Marine resistance — the membrane resists the salt air and the fog
- Low maintenance — the TPO is easy to repair and lasts 20 to 30 years
The Benefits of a White TPO Roof
The white membrane is the key. The reflective surface cuts the heat load on the building, which reduces the cooling costs. The heat-welded seams are the second benefit, creating a bond that resists the moisture better than the glued seams.
How We Install TPO Roofs in Burlingame
- Survey the roof — measure the surface and check the deck
- Install the insulation — the rigid board with the tapered slope
- Lay the TPO membrane — the white membrane rolled out over the insulation
- Weld the seams — the hot-air welder fuses the sheets together
- Flash the details — the drains, the HVAC, and the walls
TPO Roofing Costs in Burlingame
| Service | Typical range | What’s included | Warranty |
|---|---|---|---|
| 45-mil TPO roof | $5 – $9 per sq ft | Membrane, seams, flashings | 20 years |
| 60-mil TPO roof | $6 – $12 per sq ft | Thicker membrane, seams, flashings | 25 years |
| TPO repair | $1,000 – $6,000 | Patch tears, re-weld seams | 5 years |
| TPO re-coat | $2,000 – $5,000 | Clean, prime, coat the membrane | 5 years |
Expert tip: the 60-mil TPO is the better value for Burlingame. The thicker membrane resists the marine moisture and the foot traffic better.
Serving Burlingame and Nearby Areas
We install and repair TPO roofs across San Mateo County — Burlingame, San Mateo, Millbrae, Hillsborough, and the surrounding Peninsula communities.
FAQ
Content above. FAQs are in frontmatter.
Start with a free TPO roofing estimate. Call us today for local crews.
More Services
All Roofing Services in Burlingame
Every roofing service we run in Burlingame, San Mateo County — pick the one your roof needs.
Roofing Materials
Damage & Restoration
Maintenance & Prevention
Gutters & Exterior
Service Area
Burlingame Service Area
Licensed tpo roofing contractors serving Burlingame and San Mateo County and the surrounding area.
Serving Burlingame and San Mateo — Call for a free estimate
TPO Roofing Across California
TPO Roofing in Other California Cities
We run tpo roofing in 147 other California cities — see local pricing, process, and FAQs for your area.
FAQ
Frequently Asked Questions
How much does a TPO roof cost in Burlingame?
A TPO roof runs $5 to $12 per square foot installed. The cost depends on the thickness and the insulation.
Why is TPO good for the Peninsula climate?
The white membrane reflects the heat, and the heat-welded seams resist the moisture and the wind.
How long does a TPO roof last?
A quality TPO roof lasts 20 to 30 years with proper maintenance.
Do you repair existing TPO roofs?
Yes. We patch the tears, re-weld the seams, and repair the flashings.
Do you serve the Burlingame area?
Yes. We serve all of Burlingame and the surrounding Peninsula communities.
Does your work come with a warranty?
Yes. The installation comes with a workmanship warranty and the membrane with a manufacturer's warranty.
Free Estimates
Get a Free Roof Estimate
Talk to a local roofing expert today. Fast, honest estimates with no pressure.