TPO Roofing in San Bruno, California
Thermoplastic polyolefin (TPO) single-ply roofing — energy-reflective, durable, and ideal for commercial roofs. Free estimates, licensed local crews, written warranty.
Licensed & Insured
Credentialed local crews
Workmanship Warranty
In writing, every job
Free Estimates
No pressure, no surprises
Hassle-Free Claims
We work with your adjuster
TPO Roofing in San Bruno, California
The TPO membrane is a strong choice for the flat roofs in San Bruno. It is durable, heat-welded at the seams, and handles the damp. TPO roofing in San Bruno installs the membrane that lasts in the coastal climate.
Why TPO Roofing Suits San Bruno
- The seam strength — the heat-welded seams are stronger than the adhesive seams
- The damp resistance — the membrane resists the fog and the moisture
- The UV resistance — the white membrane reflects the sun and the UV
- The long life — the TPO lasts 20 to 30 years with the proper installation
- The repair ease — the TPO patches are heat-welded and seamless
How We Install TPO Roofs in San Bruno
- Inspect the deck — check the condition and the slope of the roof
- Prepare the surface — clean and prime the deck for the membrane
- Install the insulation — the polyiso board improves the energy efficiency
- Install the membrane — the 60-mil TPO membrane in the manufacturer’s pattern
- Heat-weld the seams — the seams are welded into a single sheet
- Install the flashing — the edge metal, the pipe boots, and the wall flashing
TPO Roofing Costs in San Bruno
| Service | Typical range | What’s included | Warranty |
|---|---|---|---|
| TPO roof installation | $6,000 – $15,000 | 60-mil membrane, insulation, flashing | 20 years |
| TPO roof replacement | $7,000 – $16,000 | Tear-off, insulation, new membrane | 20 years |
| TPO repair | $500 – $3,000 | Heat-welded patch, seam repair | 5 years |
| TPO coating | $2,000 – $6,000 | Clean and coat the existing roof | 10 years |
Preventing Roof Problems in San Bruno
- Check for the ponding water — the standing water degrades the membrane
- Check the seams each year — the welded seams need the inspection
- Clear the debris — the coastal wind blows the debris up
- Limit the foot traffic — the punctures are the common leak point
Expert tip: in San Bruno, the TPO membrane should be the light color. The white TPO reflects the sun and keeps the building cooler. The heat-welded seams are the key to the watertight roof.
Serving San Bruno and Nearby Areas
We install TPO roofs across San Mateo County — San Bruno, South San Francisco, Millbrae, Burlingame, San Mateo, and the surrounding communities.
FAQ
Content above. FAQs are in frontmatter.
Start with a free TPO roof inspection and estimate. Call us today for local crews.
More Services
All Roofing Services in San Bruno
Every roofing service we run in San Bruno, San Mateo County — pick the one your roof needs.
Roofing Materials
Damage & Restoration
Maintenance & Prevention
Gutters & Exterior
Service Area
San Bruno Service Area
Licensed tpo roofing contractors serving San Bruno and San Mateo County and the surrounding area.
Serving San Bruno and San Mateo — Call for a free estimate
TPO Roofing Across California
TPO Roofing in Other California Cities
We run tpo roofing in 147 other California cities — see local pricing, process, and FAQs for your area.
FAQ
Frequently Asked Questions
How much does a TPO roof cost in San Bruno?
Most TPO roofs in San Bruno run between $6,000 and $15,000 depending on the size.
Why is TPO popular in San Bruno?
The membrane is durable, heat-welded at the seams, and resists the damp.
How long does a TPO roof last in San Bruno?
A properly installed TPO roof lasts 20 to 30 years.
Do you repair TPO roofs?
Yes. We repair and restore TPO roofs with heat-welded patches.
Is TPO good for a garage roof?
Yes. TPO works well on flat garage and addition roofs.
Free Estimates
Get a Free Roof Estimate
Talk to a local roofing expert today. Fast, honest estimates with no pressure.